Observing some principles for accurate installation is crucial to your trusted and suitable operation with the gearbox or gear motor.
The rules set out here are meant like a preliminary manual to picking gearbox or gear motor. For successful and suitable installation, stick to the directions provided inside the installation, utilize the maintenances guide to the gearbox obtainable from our income department.
Following is a quick outline of set up guidelines:
a) Fastening:
Area gearbox on the surface offering satisfactory rigidity. Mating surfaces need to be machined and flat.
Mating surfaces have to be inside definite geometric tolerances (see manual). This can be primarily true of flange-mounted gearboxes with splined hollow shafts.
In applications that involve higher radial loads with the output end, flange mounting is encouraged for some gearbox sizes as this mounting makes utilization of the double pilot diameters presented in these gearboxes.
Be sure the gearbox is appropriate for your expected mounting place.
Use screws of resistance class 8.eight and over to secure the gearbox. Torque up screws to the figures
indicated within the pertinent tables.
With transmitted output torque higher than or equal 70% of the indicated M2max torque, and with
frequent movement reversals, use screws with minimal resistance 10.9.
Some gearbox sizes is usually fastened utilizing both screws or pins. Of pin seated during the frame the gearboxes be at the very least one.5 instances pin diameter.
b) Connections
Safe the connection elements to gearbox input and output. Will not tap them with hammers or very similar resources.
To insert these components, make use of the service screws and threaded holes offered within the shafts. You’ll want to clean off any grease or protects through the shafts in advance of fitting 
any connection elements.
Fitting hydraulic motors.
Be careful the O ring involving motor flange and gearbox input flange when assembling. Install the
hydraulic motor before filling lube oil to the gearbox.
Connecting the hydraulic brake.
The hydraulic circuit really should be such to guarantee that brake is launched instants before gearbox starts and utilized just after gearbox has stopped. Check out that stress during the hydraulic line for brake release is at zero anytime gearbox is stopped.
Route of rotation
Motors are linked for the ideal electrical or hydraulic circuit in line with their direction of rotation.
When doing these connections, keep in mind that all gearboxes, no matter if in the in-line or right angle design and style, possess the exact same path of rotation each at input and output. For far more information of your connection of electric and hydraulic motors, see related sections within this catalogue.
