Description
1. The structural scheme, appearance drawing, and other drawings in the sample are examples.
There are no strict ratio requirements. If you need exact dimensions for certain types, please contact
Our sales department.. (unmarked dimensions are in millimeters).
2. The reducer has been tested before leaving the factory, and the user should add lubricating oil before operation.
3. We can only refer to the oil market in the manual. The actual oil level should be
The mark on the oil immersion.
4. The viscosity of lubricating oil should be selected according to the working conditions and environment
temperature.
5. In order to prevent accidents, all rotating parts should be equipped with protective covers according to regulations.
National and regional safety regulation.
6. The solid shaft input structure reducer is not equipped with a motor.
7. If there is no special instruction for Y series motors, the protection level is IP54 when leaving the factory.
8. Unless otherwise stated, you will receive a 0° junction box.
|
Housing material
|
Cast iron/Ductile iron
|
|
Housing hardness
|
HBS190-240
|
|
Gear material
|
20CrMnTi alloy steel
|
|
Surface hardness of gears
|
HRC58°~62 °
|
|
Gear core hardness
|
HRC33~40
|
|
Input / Output shaft material
|
42CrMo alloy steel
|
|
Input / Output shaft hardness
|
HRC25~30
|
|
Machining precision of gears
|
accurate grinding, 6~5 Grade
|
|
Lubricating oil
|
GB L-CKC220-460, Shell Omala220-460
|
|
Heat treatment
|
tempering, cementing, quenching, etc.
|
|
Efficiency
|
94%~96% (depends on the transmission stage)
|
|
Noise (MAX)
|
60~68dB
|
|
Temp. rise (MAX)
|
40°C
|
|
Temp. rise (Oil)(MAX)
|
50°C
|
|
Vibration
|
≤20µm
|
|
Backlash
|
≤20Arcmin
|
|
Brand of bearings
|
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
|
|
Brand of oil seal
|
NAK — Taiwan or other brands requested
|
