Standard Description
Consisting of a stress balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this energy unit is designed to operate materials managing gear. The decreasing motion is achived by the solenoid valve using the decreasing speed managed by an adjustable needle valve. The left and appropriate functions are equipped using a dual pilot operated examine valve and cross-over relief valves.
Remark: Please talk to our product sales engineer for that unique pump displacement, motor electrical power or tank capacity.
Exclusive Notes
one. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
2. Clean every one of the hydraulic components concerned just before installation of the power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which should also be clean and cost-free of impurities.N46 hydraulic oil is suggested.
4. This electrical power unit really should be mounted horizontal.
5. Check the oil level in the tank right after the initial start out in the power unit.
6. Oil altering is required right after the original a hundred operation hours, afterwards after just about every 3000 hrs.