Materials Dealing with Electrical power UNIT one
This electrical power unit is built for your fork lift field, consisting of highly efficient gear pump, DC motor, manual increase and lower valve, tank, ect. The up and down motion are managed by the lever on the guide release valve, which is outfitted with an electric switch to activate the motor. The lowing velocity is managed from the strain compensated flow management valve.
1. The duty of this electrical power unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean each of the hydraulic elements concerned ahead of set up of the power unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst, which need to also be clean and free of impurities, N46 hydraulic oil is proposed .
4. Oil modifying is required soon after the first a hundred operation hrs, afterwards as soon as each 3000 hours.
5. The energy unit proven is designed to be mounted horizontally.
Materials Handling Electrical power UNIT 2
This electrical power unit attributes energy up gravity down circuit. Activate the begin solenoid to start out the motor to lift the machine. The lowing motion is activated through the solenoid valve with all the decreasing pace controlled from the pressure compensated movement manage valve. Merchandise of this series is often broadly utilized in the industry of logistic units like fork lift, mini lift table, and so forth.
one. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean the many hydraulic parts concerned in advance of mounting the electrical power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst,which really should also be clean and totally free of impurities, N46 hydraulic oil is advisable .
four. Oil modifying is needed right after the first 100 operation hrs,afterwards after every single 3000 hours.
five. The energy unit really should be mounted horizontally.